Demilec Wall Insulation Nationwide

Demilec Wall Insulation in Pflugerville: What to Know First

We provide independent Demilec wall insulation service in Pflugerville, typically turning around standard injection foam jobs in one to two days once the written scope is signed. Most Demilec wall insulation projects in the area run between $2,800 and $5,400 depending on wall cavity depth, square footage, and whether we’re drilling and filling existing drywall or accessing through exterior siding. We don’t start work until you have a written price in hand - that’s Haven Standard Clause 1, and it’s how we’ve operated since 2016.

Call (737) 259-8352

This page is for homeowners in Pflugerville, the Stone Hill Town Center corridor, and nearby neighborhoods who have a Demilec product in their walls and need to know whether it can be repaired, supplemented, or replaced. If you’re seeing temperature stratification between rooms, hearing more road noise than you used to, or dealing with rising summer cooling loads in a home built between 2005 and 2018, there’s a decent chance Demilec open-cell or closed-cell foam is involved. Call (737) 259-8352 to schedule a free estimate - we’ll bring a written price, not a sales pitch.

How Demilec Products Fail - and How We Fix Them

• Demilec Sealection 500 open-cell shrinkage in gable walls. Sealection 500 can pull away from studs by 1/8 to 3/16 inch after five to seven Pflugerville summers, creating thermal bypass channels we spot with infrared cameras. We remove the compromised foam with controlled extraction, re-seal the cavity with a compatible low-expansion injection foam, and verify with a post-job blower-door test - a pressurization reading that shows, in one number, how much air the building envelope is losing.
• Demilec Heatlok HFO High Lift closed-cell odor complaints in interior walls. Heatlok HFO can off-gas amine catalysts if the A/B mix ratio drifted during original install, which happens more than Demilec’s documentation suggests. We don’t mask the smell; we cut access, remove the affected lift, and re-apply with a third-party HFO system that meets the same R-value target without the amine chemistry.
• Demilec Agribalance shrinkage in 2×4 exterior walls. Agribalance, the soy-based open-cell line, is more hydrophilic than petroleum-based alternatives and can degrade where Pflugerville’s spring humidity hits south-facing walls with poor vapor retarder detailing. We assess whether the cavity is salvageable or if full removal is warranted, then specify a replacement that accounts for the wall’s actual moisture drive direction.
• Demilec Sealection Agribond delamination from OSB sheathing. Agribond’s adhesive bond to engineered wood can fail when sheathing moisture content cycles above 18 percent, common in Pflugerville homes with inadequate overhangs or missing kickout flashing. We strip the cavity, allow the sheathing to dry to below 14 percent, then re-insulate with a system that includes an explicit drainage plane.
• Demilec Heatlok XT thermal drift in walls with intermittent HVAC. Heatlok XT’s R-value can degrade 10 to 15 percent over time if the wall cavity experiences repeated expansion and contraction from a heat pump cycling on and off in shoulder seasons. We don’t just add more foam; we calculate the whole-wall R-value with the degraded layer included, then specify a hybrid approach - retained Heatlok XT where sound, supplemental injection where thermal performance is the priority.

Our Demilec Wall Insulation Process

1. 1
   Site survey and blower-door baseline. We pressurize the house to 50 Pascals and record the CFM50 reading - your starting number. In Pflugerville’s clay-heavy soils, we also note any foundation movement cracks that could affect wall cavity continuity.
2. 2
   Infrared and borescope inspection. We drill 3/8-inch inspection ports in inconspicuous locations to visually confirm Demilec product type, density, and condition. We photograph everything; you get the images.
3. 3
   Written scope and price. Under Haven Standard Clause 1, we deliver a flat price, written scope, and written warranty before anyone lifts a tool. No exceptions. This includes our OEM-versus-aftermarket parts recommendation with the reasoning stated plainly.
4. 4
   Air sealing before insulation. We seal top plates, electrical penetrations, and any gaps between the bottom plate and slab - because blowing new insulation over an unsealed wall cavity is only half the job. The report tells you what the house does. The insulation changes what the house does. Those are two different conversations.
5. 5
   Injection or removal and replacement. For drill-and-fill jobs, we patch with matching texture. For full removals, we contain the debris and HEPA-vacuum the cavity before re-install. Wes Okafor reviews the mid-job photos personally.
6. 6
   Post-job blower-door test and documentation. We pressurize again, record the new CFM50, and hand you a written pre- and post-job report with actual numbers. Every job gets a Documented Photo Record; applicable jobs get the blower-door comparison.

Before

After

What Demilec Wall Insulation Costs in Pflugerville

These are real ranges for Demilec wall insulation work we’ve completed in Pflugerville and the surrounding area. Your written estimate will land inside or outside these brackets based on what the inspection finds.

Factors that push prices up: stucco exterior requiring surgical cutting and repatching, knob-and-tube wiring that must be de-energized, or Kitec plumbing in the wall cavity. Factors that don’t: we don’t charge extra for the blower-door test or the photo documentation - those are standard on every job. Call (737) 259-8352 for an exact quote; estimates are free and come with a written price before any work starts.

Why Pflugerville Homeowners Call Topside Attic Insulation Pflugerville for Demilec Work

We’ve been in and out of attics and walls throughout Pflugerville’s Stone Hill Town Center corridor often enough that the regional heat load patterns aren’t a surprise to us. Our crew knows the difference between Sealection 500 and Heatlok HFO by sight and density, and we don’t guess at whether your existing foam is salvageable - we measure, photograph, and tell you exactly what we found.

Every job carries the 365-Day Done Right Promise: if it’s not done right, we make it right. We also work with Reflectix and other brands, so if your walls need a hybrid solution rather than a Demilec-only approach, we’ll say so upfront. Calls are answered by a live person 24/7. Background-checked, uniformed technicians. A written price before any work starts, always.

FAQs