Insulation Before & After in Pflugerville, TX
Photos don’t lie. A blower-door number doesn’t either. We’ve documented every attic, crawl space, and wall cavity we’ve touched in Pflugerville since 2016 - 9,000 homes and counting. Below are the transformations we see most often, with the pressurization readings and photo records to back them up.
Recent Transformations
Attic Air Sealing + Blown-In Insulation in Old Town Pflugerville
The homeowner on Pecan Street called after their summer electric bill cleared $400 three months running. Our blower-door test read 3,800 CFM50 - roughly double what a 1978 ranch in Pflugerville should leak. We pulled back the existing batts, sealed every top plate joint and can-light housing with fire-rated caulk and foam, then blew in 14 inches of GreenFiber cellulose to R-49. Final blower-door: 2,100 CFM50. The August bill dropped to $247. Documented Photo Record and written scope delivered before we left.
Crawl Space Encapsulation in Windermere
A couple on Klattenhoff Lane had musty indoor air every spring and floors so cold in January their dog refused to walk on them. The crawl space was vented to outside, with dirt floors and saturated fiberglass batts hanging like wet laundry from the joists. We removed the old material, installed a 12-mil reinforced vapor barrier sealed to foundation walls, closed the vents, and air-sealed the rim joists with closed-cell spray foam. The blower-door dropped 18% just from below-grade sealing. Floor surface temperature rose 11 degrees. Written price was $8,400; no change orders, no surprises.
Spray Foam Insulation in Heatherwilde
A two-story in Heatherwilde had a bonus room over the garage that hit 94 degrees by 2 PM every July. The previous approach was more attic-floor insulation, which missed the actual problem: the roof deck was radiating heat directly into the conditioned space. We applied 5.5 inches of Icynene open-cell spray foam to the entire roof deck and gable ends, converting the attic to conditioned space. The bonus room now stays within 3 degrees of the downstairs thermostat. The blower-door improved from 2,600 to 1,850 CFM50. Homeowner’s comment: “Should’ve done this first.”
Radiant Barrier + Attic Cleaning in Falcon Pointe
The call started with scratching sounds. In the attic above a Falcon Pointe two-story, we found 6 inches of compressed, rodent-compromised fiberglass, active roof-rat trails, and gnawed flex duct. We removed all contaminated material, sanitized the deck, installed metal flashing and hardware cloth at every penetration, repaired the ductwork, and laid a perforated radiant barrier across the rafters. The attic went from a 140-degree oven to a manageable 102 degrees on the same 103-degree August afternoon. No callbacks in 18 months. The 365-Day Done Right Promise covers the air-sealing and barrier work; the rodent proofing carries its own 2-year materials warranty.
Insulation Removal and Replacement in Park at Blackhawk
A roof leak that went undetected for two seasons ruined the existing insulation in a Park at Blackhawk home. The batts were stained, compressed, and showing mold at the eaves. We extracted everything, HEPA-vacuumed the deck, treated affected sheathing with antimicrobial, and blew in fresh Owens Corning fiberglass to R-38. The blower-door started at 4,100 CFM50 - partly due to the wet insulation creating gaps, partly due to years of unsealed penetrations. We sealed, then insulated. Final reading: 2,400 CFM50. Written scope specified the removal depth, treatment protocol, and replacement material by brand and R-value. Photo record shows every stage.
Wall Insulation Retrofit in Morningside
A 1985 Morningside home had never had cavity wall insulation. The owners could feel drafts through outlet covers in January. We drilled strategic access holes, dense-packed each stud bay with GreenFiber cellulose at 3.5 pounds per cubic foot, and patched with matching siding. No interior repair needed. The blower-door reading fell from 3,200 to 2,550 CFM50 - a 20% improvement from walls alone, on a house where the attic had already been addressed by another contractor who skipped the air sealing. We didn’t touch the attic; the walls were the remaining gap. Written price was $4,800 for 1,800 square feet of wall area. Done in two days.
What Every Job Includes
These aren’t cherry-picked. Every completed job gets the same documentation:
- Written price before any work starts - flat, with scope and warranty spelled out. Haven Standard Clause 1.
- Before-and-after blower-door readings - where air sealing is part of the scope, you get the pressurization number in writing.
- Documented Photo Record - dated, geotagged, delivered automatically. Not available on request; included by default.
- 365-Day Done Right Promise - if it’s not right, we make it right. Backed by the written scope you already have.
Materials vary by job - Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, GreenFiber - whichever fits your envelope and your budget. No proprietary lock-in. We specify what we’re using and why.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWant Results Like These?
Call (737) 259-8352. A live person answers, 24/7. We’ll schedule a free assessment, deliver a written price before any work starts, and if you already have another estimate, we’ll read it with you - free second opinion, no obligation. Wes Okafor and the crew at Topside Attic Insulation Pflugerville have been sealing and insulating homes here since 2016. Let’s see what your blower-door number looks like.
Written by Wes Okafor, Owner at Topside Attic Insulation Pflugerville, serving Pflugerville since 2016.