CertainTeed Home Energy Audit Nationwide

CertainTeed Home Energy Audit in Pflugerville: What to Know First

A CertainTeed home energy audit in Pflugerville typically runs between $280 and $520, depending on the size of the home and the depth of testing needed. Most audits are scheduled within two business days, and you’ll receive a written scope with flat pricing before any work begins - that’s Haven Standard Clause 1. We’re an independent CertainTeed service provider, not a factory-authorized dealer, which means we test and report without a sales quota driving the recommendation.

Call (737) 259-8352

This page is for Pflugerville homeowners who have CertainTeed insulation products - Celotex, InsulSafe, or TrueComfort batts - and want to know whether their building envelope is performing as designed. If your upstairs rooms won’t cool evenly in July, or your winter gas bills spiked after a renovation, the audit will show you where conditioned air is escaping and whether your CertainTeed insulation is compromised, displaced, or simply not enough for this climate. Call (737) 259-8352 to schedule. Estimates are free.

How CertainTeed Products Fail - and How We Fix Them

• Celotex Thermax polyiso board in Pflugerville attics: The foil facing on older Thermax boards delaminates in our attic heat, creating a radiant barrier that no longer reflects and an air gap that pulls humidity inward. We find this often in homes near Stone Hill Town Center built during the 2012-2018 construction wave. Our fix is removal of the compromised board, air sealing of the deck penetrations the board was hiding, and replacement with a properly detailed assembly - usually blown fiberglass or spray foam, depending on the roof pitch.
• InsulSafe SP loose-fill fiberglass settling in truss-framed attics: CertainTeed’s blown fiberglass is specified at a settled density, but Pflugerville’s thermal cycling - 30-degree morning lows to 100-degree afternoons in shoulder seasons - accelerates settlement beyond the design curve. The R-value drops before the warranty period ends. We measure depth across a grid pattern, identify the thin spots, and supplement only where the existing material is viable. When it’s too far gone, we remove and replace with fresh material at the correct coverage chart density.
• TrueComfort fiberglass batts compressed by homeowner storage: This is a failure of use, not manufacture, but it’s common enough that we see it weekly. Pflugerville’s lack of basements pushes holiday decorations and out-of-season gear into attics, and TrueComfort batts compress to half their loft under plywood decking. Compressed fiberglass loses 40 to 50 percent of its rated R-value. We relocate storage to platform frames above the insulation plane, air seal the platform penetrations, and reinstall batts or switch to blown-in where access is limited.
• CertainTeed membrane vapor barriers installed backward: In crawl spaces and unconditioned basements, the kraft or poly facing goes toward the conditioned side - warm in winter. In Pflugerville’s cooling-dominated climate, contractors sometimes install it conventionally, trapping summer moisture against the subfloor. We find mold staining on the joist bays and compromised facing. The fix is removal, drying of the assembly, correct vapor retarder placement for our climate zone, and often crawl space encapsulation to control the source of that moisture.
• SmartBatt with MoistureSense technology that never activated: CertainTeed’s phase-change treated batts are designed to absorb and release moisture, but in Pflugerville’s hard-water areas - the calcium-heavy municipal supply in the older east-side neighborhoods - the treatment can crust and lose effectiveness. The batt still insulates, but the dynamic moisture buffering stops working. We test with a moisture meter and thermal camera, and if the SmartBatt is inert, we treat it as standard fiberglass and address the moisture source directly rather than selling you on replacement for a failed feature you didn’t need.

Our CertainTeed Home Energy Audit Process

1. 1
   Call intake with a live person. We ask when the home was built, what CertainTeed products you know are present, and what symptom prompted the call. We schedule within two business days, sometimes same-day if the schedule allows.
2. 2
   Pre-test blower-door run. We pressurize the house to 50 Pascals and record the CFM50 - a single number showing how much air the envelope is losing. In Pflugerville’s 2005-2015 stock, we typically see 3,500 to 5,500 CFM50 before any work.
3. 3
   Thermal imaging and insulation inspection. The FLIR camera shows us where CertainTeed batts have gaps, where blown-in has settled, and where top plates and can lights are leaking conditioned air into the attic. We photograph everything.
4. 4
   Duct leakage test if indicated. If the ductwork runs through the attic - common in Pflugerville’s slab-on-grade construction - we pressurize the duct system and measure leakage to outdoors. A 20-percent leakage rate means you’re conditioning your attic.
5. 5
   Written scope with flat price. Before any work starts, you get a written price, a written scope, and a written warranty. No exceptions. This is Haven Standard Clause 1.
6. 6
   Post-test and documentation. On jobs where we perform air sealing or insulation work, we run the blower door again and hand you the before-and-after numbers. The Documented Photo Record goes to your email before the crew leaves.

Before

After

What CertainTeed Home Energy Audit Costs in Pflugerville

Most CertainTeed home energy audits in Pflugerville fall between $280 and $520. Here’s how the price breaks down:

What moves the price: attic square footage, roof pitch (steep roofs take longer), whether we need to move stored items, and the condition of existing CertainTeed material. Homes in the Blackhawk and Avalon developments tend toward the higher end - larger footprints, complex rooflines, and more penetrations to seal. We also service Reflectix radiant barrier systems, and can evaluate hybrid assemblies where CertainTeed and Reflectix were combined by a previous installer.

Call (737) 259-8352 for a written estimate. Estimates are free, and we offer a Free Second Opinion on any written estimate you’ve already received - bring it in and we’ll read it with you.

Why Pflugerville Homeowners Call Topside Attic Insulation Pflugerville for CertainTeed Work

We’ve been in and out of attics throughout Pflugerville’s Stone Hill Town Center corridor often enough that the regional heat load patterns aren’t a surprise to us. Wes Okafor, our owner, trained in building systems technology at Kennedy-King College on Chicago’s South Side, where the instructors drilled air-sealing fundamentals - the idea that blown-in insulation is only half the job if the can lights and top plates are still leaking.

We don’t blow insulation over an unsealed attic floor. Period. Every job that includes air sealing gets before-and-after blower-door numbers so you can verify the result. The 365-Day Done Right Promise applies to all completed work, and a live person answers calls 24/7 - no voicemail loops, no callback windows measured in business days. The report tells you what the house does. The insulation changes what the house does. Those are two different conversations.

FAQs