Reflectix Insulation in Pflugerville, TX | Topside Attic Insulation Pflugerville
Reflectix radiant barrier service in Pflugerville typically runs $1,800-$3,400 for a full attic replacement, depending on roof geometry and whether the existing barrier can be removed without disturbing blown insulation underneath. We’re an independent contractor - not authorized or endorsed by Reflectix - and we’ve worked with their products across hundreds of Pflugerville attics since 2016. Call (737) 259-8352 for a written estimate before any work starts.
Why Pflugerville Residents Choose Us for Reflectix Service
We know how Reflectix performs in attics that hit 145°F before noon. That’s not theoretical - it’s what we measure in Pflugerville production homes built by D.R. Horton, Lennar, and KB Home from the early 2000s through the late 2010s. Wes Okafor, our owner, trained in building systems technology at Kennedy-King College on Chicago’s South Side, where instructors drilled air-sealing fundamentals before insulation was ever discussed. He’s carried that sequence into every Pflugerville Attic Insulation job: seal first, then insulate, then verify with a blower-door test - a pressurization reading that shows, in one number, how much conditioned air the house was losing.
We stock genuine Reflectix rolls locally because the foil-to-bubble bond and emissivity rating are consistent and carry the manufacturer’s warranty for stated conditions. When we find delaminated or dust-fouled Reflectix, we don’t patch it - we replace it with new material and document the before-and-after attic temperature difference. Every customer gets a written price before anyone lifts a tool, a Documented Photo Record of the work, and on applicable jobs, pre- and post-blower-door CFM50 numbers. Under our Haven Standard, you also get the 365-Day Done Right Promise: if it’s not done right, we make it right.
Our crew has been in and out of attics throughout the Stone Hill Town Center corridor often enough that the regional heat load patterns aren’t a surprise. The report tells you what the house does. The insulation changes what the house does. Those are two different conversations.
Common Reflectix Insulation Problems We Solve in Pflugerville
- Foil delamination and surface oxidation from sustained attic heat above 145°F. Pflugerville’s IECC Climate Zone 2 summers push attic temperatures past the threshold where Reflectix’s reflective layer begins to flake off. What starts as a shiny radiant barrier turns into a dusty, non-reflective sheet with emissivity close to that of bare cardboard. We see this most in 15-to-20-year-old original installs in Blackhawk and Springbrook, where the product has simply cooked past its useful life.
- Staple-tab pull-through and sagging on 24-inch-on-center framing. Production builders in Pflugerville standardized wide rafter spacing to save material cost. Reflectix ST16025 staple-tab product, installed without additional support, bows between these spans and traps nothing. The radiant barrier becomes a loose curtain that reflects poorly and obstructs ventilation airflow.
- Dust accumulation on upward-facing foil in vented attics. Pflugerville’s caliche soil and seasonal dust storms coat the top surface of horizontal Reflectix installations. A dirty radiant barrier can lose over half its effective reflectivity - we measure this with an infrared thermometer and show the customer the hot spots where dust has killed performance.
- Misapplication directly over blown fiberglass with no air gap. Builder-grade crews often laid Reflectix flat on top of R-30 blown fiberglass, short-circuiting the required reflective air space. The product can’t reject radiant heat if it’s touching insulation. We find this in virtually every pre-2015 Pflugerville tract home we open.
- Compression of underlying R-30 fiberglass beneath failed Reflectix. When sagging barrier material settles onto blown insulation, it crushes the fiberglass and reduces its effective R-value. In Pflugerville’s repeated-floor-plan subdivisions, this double failure - dead radiant barrier plus compressed fiberglass - is predictable street by street.
Before
AfterReflectix Service in Pflugerville: What Local Conditions Mean for Your Equipment
Pflugerville’s residential inventory is almost entirely 2000s-2020s production-built tract homes - master-planned subdivisions like Blackhawk and Springbrook constructed by volume builders to minimum R-30 attic standards that now fall well below the R-49 recommendation for IECC Climate Zone 2. After Winter Storm Uri in February 2021 exposed how poorly these homes handled sustained freezing temperatures, and with consecutive record-heat summers driving electricity bills to painful highs, Pflugerville’s insulation upgrade market is unusually concentrated in a single construction era with a single, known deficiency. This matters for Reflectix specifically because the original radiant barrier installs in these homes were done to the same spec sheet, by the same subcontractor crews, on the same roof geometry, repeated across hundreds of lots. When we open one attic on a Blackhawk street and find delaminated ST16025 staple-tab product sagging between 24-inch rafters with dust-fouled upward faces, we can walk next door and predict what we’ll find. The uniformity that made these subdivisions cheap to build makes their Reflectix failures equally uniform - and equally correctable with the same replacement protocol.
Our Reflectix sales & service covers this exact scenario: removal of failed material, verification of underlying insulation condition, installation of proper baffles and ventilation, and new Reflectix product with correct air gap against the roof deck. We document attic temperature before and after with calibrated sensors, not guesswork.
Reflectix Models & Products We Service in Pflugerville
We work with the full Reflectix radiant barrier line and stock the most common sizes for Pflugerville’s typical roof pitches and square footages:
- Reflectix BP24010 Double Reflective Insulation Roll (48 in. x 10 ft.) - compact coverage for smaller attic sections or gable-end applications
- Reflectix BP48010 Double Reflective Insulation Roll (48 in. x 10 ft., larger coverage) - extended runs for open attic planes
- Reflectix ST16025 Staple Tab Reflective Insulation (16 in. x 25 ft.) - rafter-bay installation with factory perforations, though we reinforce on 24-inch centers to prevent the pull-through we see constantly in local production homes
- Reflectix RB48125 Radiant Barrier Roll (48 in. x 125 ft.) - our standard for full roof-deck replacement jobs; the coverage and consistent foil quality justify the material cost when we’re already mobilized for removal and prep
We use genuine Reflectix rolls for replacement work because the foil-to-bubble bond and emissivity rating are warrantied by the manufacturer for stated conditions. Aftermarket reflective products with inconsistent metallization fail faster in Zone 2 heat, and we won’t install them. For fast Pflugerville turnaround, we keep RB48125 and BP48010 in stock locally - most replacement jobs don’t wait on material delivery.
Reflectix Service Pricing in Pflugerville
Most full Reflectix radiant barrier replacements in Pflugerville run between $1,800 and $3,400 for a typical 1,800-2,400 square foot production home, though we also offer our Spray Foam Insulation in Pflugerville for homeowners seeking a different approach. Smaller partial replacements or gable-end corrections start around $900. What moves the number: roof pitch (steeper = more labor), whether existing blown fiberglass must be removed or can stay, condition of existing ventilation baffles, and whether we’re also correcting air leaks at top plates and can lights before the new barrier goes in.
Every estimate includes a written price before any work starts - that’s Haven Standard Clause 1, no exceptions. We also provide a Free Second Opinion on any written estimate from another contractor; bring us their scope and we’ll read it with you. Call (737) 259-8352 to schedule. Estimates are free, and you’ll get the written price before we leave.
Serving Pflugerville, TX - Our Local Coverage Area
We’re based in the Pflugerville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Reflectix Insulation in Pflugerville
Yes, but only when it’s installed with a proper air gap and in good condition. R-30 fiberglass slows conductive heat transfer; Reflectix blocks radiant heat transfer from the roof deck. In Pflugerville attics that hit 145-150°F, radiant heat is the dominant load. A functioning Reflectix barrier with correct air gap can drop attic temperatures 15-25°F, which directly reduces the thermal gradient driving heat into your living space. If your Reflectix is delaminated, dust-fouled, or laid flat on the fiberglass, it’s doing almost nothing. Call (737) 259-8352 and we’ll test it - estimates are free.
Look up from your attic hatch with a flashlight. Healthy Reflectix shows a bright, mirror-like foil surface. Failed product shows dull, dusty, or flaking foil; sagging between rafters; or visible tears at staple points. If you’re not comfortable climbing up, we include attic inspection in every free estimate and document what we find with photos you keep. Call (737) 259-8352 to schedule.
Often yes, if the blown fiberglass underneath is uncompressed and uncontaminated. We remove the failed Reflectix carefully, inspect the fiberglass for settling or moisture damage, and install new barrier with proper air gap above the existing insulation. If the fiberglass is crushed or compromised, we’ll show you in the photos and quote replacement separately - no bundled mystery pricing. Call (737) 259-8352 for an exact scope and written price.
Almost certainly, if your home was built in the same phase by the same builder. Springbrook and Blackhawk used repeated floor plans and identical subcontractor crews for attic work. The same ST16025 staple-tab install with the same 24-inch rafter spacing means the same sagging, the same dust accumulation, and the same delamination timeline. We’ve replaced Reflectix on entire streets in these subdivisions because the failure mode is that predictable. Call (737) 259-8352 - we’ll confirm what you’re dealing with and give you a written price.
For full roof-deck replacement, we typically specify Reflectix RB48125 Radiant Barrier Roll - the 48-inch width covers rafter bays efficiently, and the continuous roll minimizes seams. The double-reflective rolls (BP24010, BP48010) work well for gable ends or partial applications. We avoid ST16025 staple-tab for new full installs in Pflugerville because the 24-inch-on-center framing common here causes the pull-through failures we see constantly. The right product depends on your roof geometry; we’ll specify it in writing after inspection. Call (737) 259-8352 for a written recommendation and price.
Service Areas Near Pflugerville
We provide Pflugerville service area coverage throughout the city and surrounding communities. Our crew regularly handles Reflectix work in Reflectix service in Wells Branch to the south, Reflectix service in Round Rock to the north, plus Hutto, Manor, and Brushy Creek. The same production-home patterns extend through this entire corridor - we’ve replaced Reflectix in D.R. Horton and Lennar builds across all five cities.
Book Your Reflectix Service in Pflugerville Today
Call (737) 259-8352 now. A live person answers 24/7, and we offer same-day estimates when our schedule allows. You’ll get a written price before any work starts, a Documented Photo Record when we’re done, and on applicable jobs, before-and-after blower-door numbers that show exactly what changed. The 365-Day Done Right Promise applies to every completed job.
Written by Wes Okafor, Owner at Topside Attic Insulation Pflugerville, serving Pflugerville since 2016.